Koolance CPU-390I Cold Plate CPU Waterblock
• standard G 1/4 BSPP
• CPU Liquid Cooling Block
• high-performance microfin (0.17mm)
• Acrylic Finish
With advanced Acrylic design and finish, Koolance's CPU-390I Liquid Cooling Waterblock redefines thermal cooling plate performance again with an all-new 0.17mm microfin process and internal flow optimizations. CPU-390CI features a microfin nickel-plated copper cold plate, nickel-plated copper top, and thick steel mounting bracket. Standard G 1/4 BSPP threading will accept any Koolance fitting diameter up to 19mm (3/4in) OD compression style. All now with acrylic tops to better view your liquid cooling coolant and its quality of flow through your liquid cooling system.
Nickel watercooling CPU-390I waterblock for liquid cooling
It features a microfin nickel-plated copper cold plate, acrylic top, and thick steel mounting bracket. Standard G 1/4 BSPP threading will accept any Koolance fitting diameter up to 19mm (3/4in) OD compression style. Please select the desired fitting type for this base model (it does not include fittings). The CPU-390I Liquid cooling Block supports most boards using the following processors:
• Intel socket LGA 2011-v3 / LGA 2011 (Square ILM only)
Liquid Cooling waterblocks are any important and critical Cooling component in any Liquid cooling system with its effiiciency controlled by flow rates and air fow over the CPU Waterblock.
Copper is the most practical metal to use in a liquid cooler cold plate. It provides a very high degree of thermal conductivity and is abundant at reasonable cost.
Koolance CPU blocks are made of solid, high-density nickel plated copper to remove imperfections and to increase thermal conductivity. To help resist corrosion and avoid discoloration, they are then plated in nickel.With now with Acrylic Tops for great finish lines and cooling.
|Learn More About||Koolance CPU-390I Intel CPU Waterblock
Product Type Liquid Cooling CPU Water Block
|Hardware Specifications||Wetted Materials Nickel-Plated Copper, Nickel-Plated Brass, Stainless Steel, PMM Acrylic, EPDM
Max Pressure @ 25°C 1.5kgf/cm2 (21.3psi)
Max Temperature 80°C (176°F)